• We need YOUR help for the next generation of students! Upload your notes and exams on our Notes & Resources page!
  • You must be a registered member to download resources

new PC build issue (1 Viewer)

astroman

Well-Known Member
Joined
May 12, 2014
Messages
7,096
Location
Las Vegas
Gender
Male
HSC
2015
EDIT: FIXED, FUCKING RAM WASN'T COMPTIBLE

sup guys

As the title says, my monitor gets no signal when I plug it into my GPU and power it on. I have checked it also by directly plugging the monitor into the motherboard dvi itself and I have also checked using hdmi cables.

The monitor isn't faulty because it works fine when I connect it with a vga cable to my laptop.

The computer seems to be working fine as well since all fans are spinning and the motherboard lights are on.

I tried two old monitors as well by connecting them into the GPU with DVI but still get the exact same 'no input signal' issue.

Here is a list of the parts I'm currently using:



Could someone please be able help find a possible solution.


Thanks

- "IT" student.




lol :(
 
Last edited:

ProdigyInspired

Tafe Advocate
Joined
Oct 25, 2014
Messages
646
Gender
Male
HSC
2016
Did you use a different GPU before? Perhaps Integrated? Try using integrated and install AMD Drivers.

If not use DDU to reinstall drivers.
 

Flop21

Well-Known Member
Joined
May 12, 2013
Messages
2,842
Gender
Female
HSC
2015
Try switching to different input settings on your monitor.
 

turntaker

Well-Known Member
Joined
May 29, 2013
Messages
3,945
Gender
Undisclosed
HSC
2015
Try to plug into integrated graphics. If that doesn't work. Remove the graphics card and try again. If that doesn't work. Remove all your ram and put only one in and still have your GPU removed and try that.
 

astroman

Well-Known Member
Joined
May 12, 2014
Messages
7,096
Location
Las Vegas
Gender
Male
HSC
2015
Try to plug into integrated graphics. If that doesn't work. Remove the graphics card and try again. If that doesn't work. Remove all your ram and put only one in and still have your GPU removed and try that.
tried that all, still same problem. also ryzen 7 chips have no iGPU.
 

turntaker

Well-Known Member
Joined
May 29, 2013
Messages
3,945
Gender
Undisclosed
HSC
2015
Does the motherboard have a speaker? If so does it beep when it turns on? If it doesn't beep it means there's some problem or if it keeps beeping it could mean something else.

Also did you power the GPU with the PSU.?
 

astroman

Well-Known Member
Joined
May 12, 2014
Messages
7,096
Location
Las Vegas
Gender
Male
HSC
2015
Does the motherboard have a speaker? If so does it beep when it turns on? If it doesn't beep it means there's some problem or if it keeps beeping it could mean something else.

Also did you power the GPU with the PSU.?
MOBO doesn't have a speaker but I'll try to see if I can get one, do you know of any shops in the West that stock it?

Yep GPU is powered with PSU.


Shit doesn't work yo.
 

Menomaths

Exaı̸̸̸̸̸̸̸̸lted Member
Joined
Jul 9, 2013
Messages
2,376
Gender
Male
HSC
2013
Try turning it off and on again
 

b0b101

Pharaoh
Joined
Sep 9, 2013
Messages
142
Location
Sydney
Gender
Male
HSC
2015
MOBO doesn't have a speaker but I'll try to see if I can get one, do you know of any shops in the West that stock it?

Yep GPU is powered with PSU.


Shit doesn't work yo.
Is it in the right boot mode? Some 480s have a switch on the card to put it into legacy boot, you might of tripped it when you installed it...

Also :https://www.asus.com/au/support/FAQ/1029953/
 
Last edited:

i1337

Member
Joined
Aug 24, 2012
Messages
41
Gender
Undisclosed
HSC
N/A
Get a USB to HDMI/vga/dvi or w/e displayport your monitor has, see if that works. It'll narrow down the issue. Also try inspecting the pins on the gpu slot, if some are bent u may need to align them properly. Else, jam the gpu in harder. I know this has been mentioned but really make sure all the connectors are tightly installed.
 

astroman

Well-Known Member
Joined
May 12, 2014
Messages
7,096
Location
Las Vegas
Gender
Male
HSC
2015

So hear you can see the front USB 3.0 connectors for the case came off after I unplugged it, it's tacky AF.


Broader shot of everything


Wraith spire cooler LED not working, plugged into correct RGB header. AMD light appears fine, fan is fine.


MOBO lights on, GPU light on and fans spin.

Shits fucked, i've contacted PCCASEGEAR and they are all good to get it returned and checked. I've ordered a MOBO speaker from ebay which will come next week so i'm waiting. I'm planning on returning the MOBO+CPU+COOLER+RAM+GPU so they can see what the fuck is going on.

Will update once I get a response.
 
Last edited:

i1337

Member
Joined
Aug 24, 2012
Messages
41
Gender
Undisclosed
HSC
N/A
If you get a USB to HDMI converter and return it after you've used it, it'll help narrow down the issue alot. PCG might send it back to the manufacturer, which will take a while. These converters use CPU to output video.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top