Multiple Choice (1 Viewer)

spongebob1

New Member
Joined
Mar 20, 2013
Messages
22
Gender
Undisclosed
HSC
N/A
14 is c? V= Ed where V is constant? Isnt that a linear relationship so a straight line
 

Menomaths

Exaı̸̸̸̸̸̸̸̸lted Member
Joined
Jul 9, 2013
Messages
2,373
Gender
Male
HSC
2013
1) b
2) d
3) a
4) a
5) d
6) c
7) a
8) d
9) b
10) c
11) b
12) a
13) d
14) b
15) a
16) d
17) b
18) c
19) c
20) b

Tossing up between 17 b or d.. probably determines my 19/20 or 20/20
Sadly 17 is not b :(
 

MATHmaster

Member
Joined
Dec 3, 2011
Messages
195
Location
Sydney
Gender
Male
HSC
N/A
E = V/d
You're graphing E on the y-axis and d on the x-axis
let E = y and d = x
Hence y = V/x where V is constant
Therefore it is a hyperbola
 

anomalousdecay

Premium Member
Joined
Jan 26, 2013
Messages
5,766
Gender
Male
HSC
2013
E = V/d
You're graphing E on the y-axis and d on the x-axis
let E = y and d = x
Hence y = V/x where V is constant
Therefore it is a hyperbola
You're right. It is a hyperbola. Listen to 4-unit not 2-unit.
 

anomalousdecay

Premium Member
Joined
Jan 26, 2013
Messages
5,766
Gender
Male
HSC
2013
I know that feeling.
And Chem is suppossed to be harder.

I'm gonna say this now, might be too early:

"I'm gonna miss Chemistry in uni"

HSC Chemistry is so much more enlightening than the philosophy of HSC Physics.
At least engineering uni physics is nothing like HSC.
 

Hoskiies

Member
Joined
Oct 9, 2012
Messages
90
Gender
Male
HSC
2013
1) b
2) d
3) d
4) a
5) d
6) c
7) a
8) d
9) b
10) c
11) b
12) a
13) b
14) b
15) a
16) c
17) c - Not sure, because the X axis says motor speed not time, So as motor speed increases shouldn't torque also increase?
18) c
19) c
20) b
 

yasminee96

Active Member
Joined
Sep 8, 2012
Messages
346
Gender
Female
HSC
2013
And Chem is suppossed to be harder.

I'm gonna say this now, might be too early:

"I'm gonna miss Chemistry in uni"

HSC Chemistry is so much more enlightening than the philosophy of HSC Physics.
At least engineering uni physics is nothing like HSC.
I made this really stupid decision to drop chemistry and keep physics.
kml
 

uart

Member
Joined
Dec 10, 2008
Messages
69
Gender
Male
HSC
N/A
1) b
2) d
3) a
4) a
5) d
6) c
7) a
8) d
9) b
10) c
11) b
12) a
13) d
14) b
15) a
16) d
17) b *Controversial
18) c
19) c
20) a * Should be "b"
Good work RN, all correct there except for 20. Answer for 20 is b.

Reason why 20 is b: The frequency of the light is c/lambda = 6.7E14, so *only* metal "X" is illuminated above the threshold for electron emission, so the number of emitted electrons increases only in metal "X". The number of electrons emitted from metal "Y" will remain zero both before and after the increase in intensity.

Note that Q17 is controversial. The answer to 17 could be either "b" or "d" depending on what assumptions are made. See my post below.
 
Last edited:

Menomaths

Exaı̸̸̸̸̸̸̸̸lted Member
Joined
Jul 9, 2013
Messages
2,373
Gender
Male
HSC
2013
Good work RN, all correct there except for 20. Answer for 20 is b.

Reason why 20 is b. The frequency of the light is c/lambda = 6.7E14, so only metal "X" is illuminated above the threshold for electron emission. So the number of electron increase in metal "X" only, the electrons emitted from metal "Y" will remain zero both before and after the increase in intensity.
There's one more wrong answer in there.
 

anomalousdecay

Premium Member
Joined
Jan 26, 2013
Messages
5,766
Gender
Male
HSC
2013
I made this really stupid decision to drop chemistry and keep physics.
kml
I don't know. Hope that I can somehow integrate chemistry into electrical.
It only looks good in terms of pv cells and materials used and batteries. Worst compromise of wanting to do chemical and electrical at the same time.

And you probably would have benefited more with chem for med.
 

uart

Member
Joined
Dec 10, 2008
Messages
69
Gender
Male
HSC
N/A
There's one more wrong answer in there.
Are you referring to Q17, I was just about to discuss that. That question is controversial in my opinion.

The answer for 17 is b if motor is supplied by constant current, but is d if the motor is supplied by a constant voltage source.

The question didn't specify whether the voltage was constant or if the current was constant in this case, so it's quite ambiguous. I agree that constant voltage sources are more commonly used than constant current, so it could be argued that "d" is *more* correct than "b". To be honest though, it's hard to know for sure what assumption they were expecting the students to make here and how they will mark that one.
 
Last edited:

Menomaths

Exaı̸̸̸̸̸̸̸̸lted Member
Joined
Jul 9, 2013
Messages
2,373
Gender
Male
HSC
2013
Are you referring to Q17, I was just about to discuss that. That question is controversial in my opinion.

The answer for 17 is b if motor is supplied by constant current, but is d if the motor is supplied by a constant voltage source.
The answer is what Fizzy said :)
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top