currysauce
Actuary in the making
The current of an a.c source reverses its polarity every 0.010 micro seconds. THe wavelength of the radio waves produced is what?
Last edited:
-
Best of luck to the class of 2024 for their HSC exams. You got this! Let us know your thoughts on the HSC exams here -
YOU can help the next generation of students in the community! Share your trial papers and notes on our Notes & Resources page
Question... bit tricky (2 Viewers)
- Thread starter currysauce
- Start date
Im not entirely sure, but i came across a similar question so ill use the same method
Well, it changes polarity every 0.01 microseconds, so for a full cycle, it must change polarity twice, so double that you get 0.02, thers your period, frequency = 1/p = 5x10^7 Hz (changing microsecs to seconds)
Using wavelength = c/frequency u get 6 m
Well, it changes polarity every 0.01 microseconds, so for a full cycle, it must change polarity twice, so double that you get 0.02, thers your period, frequency = 1/p = 5x10^7 Hz (changing microsecs to seconds)
Using wavelength = c/frequency u get 6 m
Last edited:
currysauce
Actuary in the making
well done
nice work
nice work
powerhouse
Member
I never saw the Period = 1 / frequency formula in the syllabus.
jarro_2783
Member
even if you don't know that formula, think about it this way.
frequency is cycles per second. So you know that one cycle is 0.02 micro seconds.
ie: f = 1 (cycle) / 0.02 (microseconds), convert to seconds and just do that division.
You can use that for any measurement per another measurement calculation like metres per second, watts per metre or whatever. If you've got one measurement per another measurement and you know a value for both, just put it in the calculator and that is your answer for the first measurement per unit of the second one.
frequency is cycles per second. So you know that one cycle is 0.02 micro seconds.
ie: f = 1 (cycle) / 0.02 (microseconds), convert to seconds and just do that division.
You can use that for any measurement per another measurement calculation like metres per second, watts per metre or whatever. If you've got one measurement per another measurement and you know a value for both, just put it in the calculator and that is your answer for the first measurement per unit of the second one.