How do I make the coil and place it on the axle. What I've done is made a coil (wrapping it around a rectangular object) and just shoved the axle around the middle and connected it to the split ring commutator. Don't think I'm meant to do that anyway, and obviously it didn't spin, so any ideas?
-
Looking for HSC notes and resources? Check out our Notes & Resources page
DC Motor Coil (1 Viewer)
- Thread starter j1mmy_
- Start date
1 - Have you placed your stator magnets around your coil setup?
2 - Check the bearings, does the coil spin easily? Is the rectangular object providing too much inertia for the coil?
3 - Upload a photo or be more descriptive so peeps have a better idea of what might be going on here.
2 - Check the bearings, does the coil spin easily? Is the rectangular object providing too much inertia for the coil?
3 - Upload a photo or be more descriptive so peeps have a better idea of what might be going on here.
http://www.google.com.au/imgres?um=...bnh=185&tbnw=190&start=0&ndsp=30&tx=102&ty=92
should look something like ^
Make sure the split-ring communtator with the coil are able to rotate
should look something like ^
Make sure the split-ring communtator with the coil are able to rotate