---help Assembling Pc--- (1 Viewer)

[blackbunny]

I did my best

700 k bl modem users

 

[MedNez]

"The requested URL /cs/mypc.JPG was not found on this server"

Sure you uploaded it?

 

[blackbunny]

bitch is case sensitive lol jpg>>>JPG renamed it

 

[Grizzly]

LOL, ok, a few things after that..
1. Most importantly, ROTATE ur mobo, CLOCKWISE, 90 degrees, so the PCI and AGP slots are facing the rear of the case - so u can plug in ur moniter etc etc.
2. INSTALL ur CPU FAN and connect power to the motherboard !
3. INSTALL ur RAM into the black slots, shown above ur CPU.
4. INSTALL a POWER SUPPLY, and plug in a rectanuglar looking plug from that, TO, the connector situated around that pink colored PRINTER port.

to be continued

 

[MedNez]

1. Get some cable ties to hold the loose cables together when you're done
2. Get some thumb screws to put the side of the case on

 

[Seraph]

100. Just because you have a full tube of thermal this does not mean you can go wild with it and make your CPU look like its been cummed on.

 

[Grizzly]

100. Just because you have a full tube of thermal this does not mean you can go wild with it and make your CPU look like its been cummed on.

rofl, yeah, do not put that much paste on, it can work against you...

 

[withoutaface]

http://www.tomshardware.com/howto/20020904/index.html
http://www.tomshardware.com/howto/20020918/index.html

These guides are a bit old, but should still do you fine

 

[AntiHyper]

That's the worst set-up comp i've ever seen LOL
I'm surprised if it can run for any longer than 20 minutes before something short-curcuits and explodes. ROFL
it doesn't even have any rams you can't expect it to even start up??
Ahh this is a precious kodak golden moment

 

[Templar]

That's the worst set-up comp i've ever seen LOL
I'm surprised if it can run for any longer than 20 minutes before something short-curcuits and explodes. ROFL
it doesn't even have any rams you can't expect it to even start up??
Ahh this is a precious kodak golden moment

Well the power's not even connected, and there's no PSU. So it won't start anyway.

And not everyone has the same expertise in building a PC as you.

 

[blackbunny]

Well the power's not even connected, and there's no PSU. So it won't start anyway.

And not everyone has the same expertise in building a PC as you.

i put the psu on the 5.12" bay

 

[withoutaface]

i put the psu on the 5.12" bay

ROFL wtf, just go to the site I gave or check your motherboard's manual and build it properly

 

[blackbunny]

as far as i know in the manual it says "place all the components inside the case" thats all i did but sadly my pc does not work :'(

 

[loquasagacious]

I can only conclude this is some sort of joke.

As the components are quite old and seem purposely misplaced. Eg a CD drive does not come with the metal case removed. Motherbaords now-a-days all come with a pretty picture asembly sheet. And really its a matter of finding where things fit/plug into. Clearly something that hasn't been done.

If however this is indeed not a joke I advise that you go to the nearest computer store and have them do it for you. In the future buy computers pre-assembled eg a DELL.

 

[blackbunny]

I can only conclude this is some sort of joke.

As the components are quite old and seem purposely misplaced. Eg a CD drive does not come with the metal case removed. Motherbaords now-a-days all come with a pretty picture asembly sheet. And really its a matter of finding where things fit/plug into. Clearly something that hasn't been done.

If however this is indeed not a joke I advise that you go to the nearest computer store and have them do it for you. In the future buy computers pre-assembled eg a DELL.

this was a joke all along , lol