• Congratulations to the Class of 2024 on your results!
    Let us know how you went here
    Got a question about your uni preferences? Ask us here

Titration Practical Exam Troubles! (1 Viewer)

untouchablecuz

Active Member
Joined
Mar 25, 2008
Messages
1,693
Gender
Male
HSC
2009
i just received my titration practical exam back, and lets just say my mark was not the best.

MUCH of the marks i had lost were due to the fact that i had done the exam and answered the questions based on the presumption that the solution of KNOWN concentration is poured into the burette.

my teacher however, sees differently and is set on the "fact" that the solution of UNKNOWN concentration is is poured in the burette.

i have gathered evidence (both from textbooks etc and mathematical) to support my point of view (that either way is fine), but before i take it any further i'd like to know what you all think OR know?

known or unknown in the burette?
 

annabackwards

<3 Prophet 9
Joined
Jun 14, 2008
Messages
4,670
Location
Sydney
Gender
Female
HSC
2009
Doesn't matter as the calculations should come out as the same answer.

At my school we usually use an UNKNOWN concentrationn of NaOH to titrate with a known concentration of a random weak acid (usually acetic). The NaOH goes into the burrette and phenolphthalein is used :)

So yeah, take further action! :jedi:
 

untouchablecuz

Active Member
Joined
Mar 25, 2008
Messages
1,693
Gender
Male
HSC
2009
i will, funnily enough, my calculated concentration of the unknown turned out to be 0.28M - the actual concentration was 0.29M

;)
 

Pwnage101

Moderator
Joined
May 3, 2008
Messages
1,408
Location
in Pursuit of Happiness.
Gender
Undisclosed
HSC
N/A
As stated above, it does not matter which way, you get the same answer. But apparently it is correct chemistry convention to put the unknown in the Burette, just like it is correct chemistry convention to, when drawing a diagram of a galvanic cell, to place the ANODE on the LEFT.
 

annabackwards

<3 Prophet 9
Joined
Jun 14, 2008
Messages
4,670
Location
Sydney
Gender
Female
HSC
2009
As stated above, it does not matter which way, you get the same answer. But apparently it is correct chemistry convention to put the unknown in the Burette, just like it is correct chemistry convention to, when drawing a diagram of a galvanic cell, to place the ANODE on the LEFT.
Oh wow, i never new that! Do you know if that's the same thing for electrolytic cells?
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top