Ways to keep comp cool? (1 Viewer)

zenger69

Bok Choyer
Joined
Aug 29, 2004
Messages
673
Location
Hot Sydney's place
Gender
Male
HSC
2005
It's really my case fan which is making the noise.

So i want to get rid of my case fan and get a really good CPU Cooler and upgrade the case fan as well.
CPU cooler i'm looking to buy is the Gigabyte 3D Rocket Pro Cooler. Any opinions?

I've looked around the net as well. Is 25 decibels loud at all or?
So any suggestions?
 
Last edited:
Joined
Nov 4, 2004
Messages
3,550
Location
Sydney
Gender
Male
HSC
2005
nick1048 said:
ahhh the problems of amd... liquid cooler is the way to go. Dude I noe has to use 7 fans and a liquid cooler due to excessive overclocking...
the only real cooker athlons was thunderbird and some palominos
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
zenger69 said:
I've looked around the net as well. Is 25 decibels loud at all or?
So any suggestions?
You'll find it hard to get any fans that go significantly below that noise level.
 

zenger69

Bok Choyer
Joined
Aug 29, 2004
Messages
673
Location
Hot Sydney's place
Gender
Male
HSC
2005
Silenx 120mm Fan with 58 CFM runs at 14 decibels or dba...

Is that the same?
So i want one of those fans.

And I'm still deciding on the CPU Fan.
 

want2beSMART

Artificial Happiness c[x
Joined
Nov 2, 2004
Messages
441
Gender
Male
HSC
2005
The Gigabyte 3D Rocket Pro Cooler is very big, bulky and heavy

my friend doesnt even have a case fan...just the 5000rpm cpu fan
 

sunny

meh.
Joined
Jul 7, 2002
Messages
5,350
Gender
Male
HSC
2002
Thermal paste is a type of material, sometimes made from silicon, that is like gel or paste. Its spread between the CPU (or whatever) and a heatsink and is designed to help transfer heat between the two.
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
With a stock AMD heatsink already installed and used, I'd expect the switch to good thermal paste to be insignificant in dropping the temperature. The CPU is already covered with thermal pad and it's very hard to clean it all out.
 

phizz

aka: Philly Cheese
Joined
Jul 4, 2004
Messages
131
Location
Wauchope (port mac')
Gender
Male
HSC
2004
Note: when using thermal paste (considering its the white one), make sure you have it as far away from your bathroom as possible!

It dose not make very good toothpaste.
 

zenger69

Bok Choyer
Joined
Aug 29, 2004
Messages
673
Location
Hot Sydney's place
Gender
Male
HSC
2005
have you tried it as toothpaste?? wat did it taste like.........?

No i went the computer store and they advised me against buying thermal jel, they said it was a waste of money.

So i guess i'll be ordering those fans.
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
zenger69 said:
No i went the computer store and they advised me against buying thermal jel, they said it was a waste of money.
True, the thermal pad from the heatsink has already destroyed the integrity of the surface of the CPU.
 

zenger69

Bok Choyer
Joined
Aug 29, 2004
Messages
673
Location
Hot Sydney's place
Gender
Male
HSC
2005
my corner computer shop must be the most honest people around.

They always try to sell me the best product. Like that big gigabyte 3d pro cooler big momma of a fan.

But yeh they're honest so i guess thats alrite.
 

Bone577

Member
Joined
Oct 6, 2004
Messages
603
Location
Parra
Gender
Undisclosed
HSC
N/A
AMD problems? Athlons run cooler than Pentiums these days. That is what Intel gets for creating a processor with the express intent of pushing huge MHZ regardless of real life performance. They get inefficent processors with big clocks, hence big temps.

Also, at 60 degrees I would say there is a problem. Unless you have overclocked you shouldnt be going that high, even with stock HSF and thermal pad. 45 is a more realistic number. Since ambient case temps seem to be 40 or less for you (according to mobo temp) I would say your HSF has problems. Either the fan isnt working well, or the contact with the CPU is flawed. Either way, get yourself a Zalman of some veriety, a site like Overclockers Australia will help you more than I can in regards to CPU cooling.

I also reccommend thermal paste, just give your CPU die a good cleaning. Besides, considering the price of aftermarket HSF's the pastes price is negligable. Also take into consideration one tube of it will last more than a few applications.

Also, I will also reccommend going with SilenX fans if you are after low noise. They are whisper quiet (i do believe they are technically less, as whisper > 14db).
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top