Whats the difference between CVEN1300, MINE1300 and MMAN1300? (1 Viewer)
- Thread starter sinophile
- Start date
Omie Jay
gone
MMAN1300 (mechanical equivalent) is 50% statics and 50% dynamics.
CVEN1300 (civil equivalent) is about 75% statics and 25% dynamics.
MINE1300 (mining quivalent) .. not too sure.
check out their course descriptions in their respective handbook pages.
do the course that corresponds to your degree. If you're a civil engineer, do cven. If you're from the mech/manufac faculty, go for mman. If you're a miner, go for mine.
CVEN1300 (civil equivalent) is about 75% statics and 25% dynamics.
MINE1300 (mining quivalent) .. not too sure.
check out their course descriptions in their respective handbook pages.
do the course that corresponds to your degree. If you're a civil engineer, do cven. If you're from the mech/manufac faculty, go for mman. If you're a miner, go for mine.
sinophile
Well-Known Member
- Joined
- Oct 25, 2008
- Messages
- 1,339
- Gender
- Undisclosed
- HSC
- N/A
Im doing Materials science and engineering. My enrolment guide says as a recommended elective do:
"1. CVEN1300 Engineering Mechanics (which also has the coruse codes MINE1300 or MMAN1300)
2. CHEM 1011 Essentials of Chemistry 1A OR CHEM1031 Higher Chemistry 1A OR CEIC1001 Engineering Chemistry"
btw, I have another question. I did HSC chemistry and obtained a mark of like 92. Do you think I should take CHEM1031 or CHEM1011? Or just CHEM1021? Or Engineering Chemistry.
Should I take CVEN1300/MINE1300/MMAN1300 1st semester and the chem 2nd semester, or the other way around?
"1. CVEN1300 Engineering Mechanics (which also has the coruse codes MINE1300 or MMAN1300)
2. CHEM 1011 Essentials of Chemistry 1A OR CHEM1031 Higher Chemistry 1A OR CEIC1001 Engineering Chemistry"
btw, I have another question. I did HSC chemistry and obtained a mark of like 92. Do you think I should take CHEM1031 or CHEM1011? Or just CHEM1021? Or Engineering Chemistry.
Should I take CVEN1300/MINE1300/MMAN1300 1st semester and the chem 2nd semester, or the other way around?
Omie Jay
gone
you cant take cven1300/mine1300/mman1300 in 1st semester because math1131 and phys1121 are its prerequisites, meaning you need to have passed those 2 subjects before being allowed to do mechanics, meaning you gotta do it in second semester.
As for which one you have to do, do whatever you want, apparently cven is the easiest. I'd say its because it only has 25% dynamics (rest is statics) and dynamics is hard. I dont know anyone who did the mine equivalent, so not sure how that one's like.
chemistry... that's an awesome hsc mark. Just do whatever chem you want.
If you know you're awesome at chem and you wanna get a HD to look good on ur academic transcript and boost your wam, then do the easiest chem. If you want a challenge, then do one of the other 2. Up to you
As for which one you have to do, do whatever you want, apparently cven is the easiest. I'd say its because it only has 25% dynamics (rest is statics) and dynamics is hard. I dont know anyone who did the mine equivalent, so not sure how that one's like.
chemistry... that's an awesome hsc mark. Just do whatever chem you want.
If you know you're awesome at chem and you wanna get a HD to look good on ur academic transcript and boost your wam, then do the easiest chem. If you want a challenge, then do one of the other 2. Up to you
sinophile
Well-Known Member
- Joined
- Oct 25, 2008
- Messages
- 1,339
- Gender
- Undisclosed
- HSC
- N/A
Thats interesting.
Still, im not sure which one is most appropriate to the Materials Engineering degree. Im strongly considering majoring in process metallurgy (which is about, if im not mistaken, extracting shit from its ore). I suppose MINE1300 is most appropriate?
Still, im not sure which one is most appropriate to the Materials Engineering degree. Im strongly considering majoring in process metallurgy (which is about, if im not mistaken, extracting shit from its ore). I suppose MINE1300 is most appropriate?
Sokolov
Member
Because Materials Engineering is much more flexible in allowing you to choose an Engineering Mechanics course, do CVEN1300 because it's easier than MMAN1300.
Mechanical Engineers don't do this, you will face enrollment problems later on.
CVEN1300 was 65% statics and 35% dynamics when I did it.
Mechanical Engineers don't do this, you will face enrollment problems later on.
What?
CVEN1300 was 65% statics and 35% dynamics when I did it.
Mine1300 is more about engineering stuffs like truss, force, momentum in a rigid body. From my exprience, they still count it as 6 UOC engineering mechanics regardless which subject you did out of the three.
About the process metallurgy, you will need/have to do a course which is called minerals and processing in second semester of year 2. Im not sure what is its course code in your program outline but it is known as MINE2810 for my program.
About the process metallurgy, you will need/have to do a course which is called minerals and processing in second semester of year 2. Im not sure what is its course code in your program outline but it is known as MINE2810 for my program.
Last edited:
Omie Jay
gone
my bad, close enough