How'd everyone go? (1 Viewer)

Joined
Sep 10, 2011
Messages
83
Gender
Undisclosed
HSC
2009
I said A, electrolytic reaction because B was worded as "stress corosion cracking" not "stress cracking corrosion"
 

taeyang

Member
Joined
May 6, 2011
Messages
335
Gender
Male
HSC
2011
I got like 90% constantly with other papers.. why did this have to be this way :(:(:(
 
Joined
Sep 10, 2011
Messages
83
Gender
Undisclosed
HSC
2009
It wasn't that hard really, lots of gimme questions like about the self lubricating bearings
 

gloopydoop

New Member
Joined
May 1, 2010
Messages
7
Gender
Male
HSC
2011
yeh i picked A as well...but i'm a bit unsure, because cold rolling would create internal stresses...
 

jgalpin

New Member
Joined
Feb 18, 2011
Messages
28
Gender
Male
HSC
2011
For the two different types of multiplexing i did: a) Three way phone call
b) Bandwith through multiple computers
and yea... the fuckin pictorial picture ..... took up like the whole page, still pretty confident i got full or close to full marks for it.
I had trouble with the bicycle velocity ratio one though
 

taeyang

Member
Joined
May 6, 2011
Messages
335
Gender
Male
HSC
2011
For the two different types of multiplexing i did: a) Three way phone call
b) Bandwith through multiple computers
and yea... the fuckin pictorial picture ..... took up like the whole page, still pretty confident i got full or close to full marks for it.
I had trouble with the bicycle velocity ratio one though
Gah... I got like 125/150 or something stupid.
 

SnowTau

Member
Joined
Oct 11, 2011
Messages
73
Gender
Male
HSC
2011
Some random answers off the top of my head

For the one with escalator with 115kg on it, answer was 414W I think.
I got 40 something mm for the extension of the cable in the last question.
Question about the current in the circuit with the lightbulb I got 2.5mA.

Any of these answers ring a bell with anyone else?
 
K

kleenextissues1

Guest
Some random answers off the top of my head

For the one with escalator with 115kg on it, answer was 414W I think.
I got 40 something mm for the extension of the cable in the last question.
Question about the current in the circuit with the lightbulb I got 2.5mA.

Any of these answers ring a bell with anyone else?
Yeah they sound like mine lol
 

xblacksheepx

New Member
Joined
Aug 13, 2011
Messages
18
Gender
Male
HSC
2011
if you look up stress corrosion cracking, it pretty much explains that it has to be b, not a, too bad i chose a as well, electrolytic wouldnt work, since thats explained as something to do with an external voltage supply or something like that. 9/10 :(
 

alen180sx

Member
Joined
Mar 30, 2010
Messages
43
Gender
Male
HSC
2011
Some random answers off the top of my head

For the one with escalator with 115kg on it, answer was 414W I think.
I got 40 something mm for the extension of the cable in the last question.
Question about the current in the circuit with the lightbulb I got 2.5mA.


Any of these answers ring a bell with anyone else?

Yeh most are right, but how did u get 2.5mA, I somehow got 20mA
 

SnowTau

Member
Joined
Oct 11, 2011
Messages
73
Gender
Male
HSC
2011
Damit :( (@ the brass thing)

@ above, I used V=IR and plugged in whatever they told us. Though I may (likely) have used the wrong voltage value.
 

ChocRush

New Member
Joined
Jul 7, 2011
Messages
2
Gender
Male
HSC
2011
Some random answers off the top of my head

For the one with escalator with 115kg on it, answer was 414W I think.
I got 40 something mm for the extension of the cable in the last question.
Question about the current in the circuit with the lightbulb I got 2.5mA.

Any of these answers ring a bell with anyone else?
Only the middle one.
I got like 1008W for the escalator question, clearly fucked that up.
I got ~43mm for the extension
and I got 25mA, not 2.5mA. Maybe I screwed up the decimal. Got 0.025A --> 25mA, right?

Also, wtf. How did everyone find that test easy? That shit was insanely hard. Pretty much like the first Engineering paper I haven't fully completed (missed a few 1-2 markers because I didn't want to waste time).
Method of Sections question was just a no. Didn't even attempt that.
The drawings were absolutely screwed up, especially the bracket. Mine didn't work out properly as 1 side ended up higher than the other. The section was alright, but still didn't fully complete it. Might get like 3/5 for it.
Drawing the MICRO-STRUCTURE OF A LAMINATE?! WTF IS THAT?!
I'm just completely screwed up with this exam. I'll be lucky to get 60%.
 

xblacksheepx

New Member
Joined
Aug 13, 2011
Messages
18
Gender
Male
HSC
2011
i got 1008 W, its sq route of 20squared + 9squared to find displacement, then displacement times force, 1150N then divide by25 seconds to get power, i got 2.5mA and 43.23mm extension, hopefully thats right :S
 

alen180sx

Member
Joined
Mar 30, 2010
Messages
43
Gender
Male
HSC
2011
Damit :( (@ the brass thing)

@ above, I used V=IR and plugged in whatever they told us. Though I may (likely) have used the wrong voltage value.
Do u remember what the values were for the extension question?
 
Joined
Sep 10, 2011
Messages
83
Gender
Undisclosed
HSC
2009
i got 1008 W, its sq route of 20squared + 9squared to find displacement, then displacement times force, 1150N then divide by25 seconds to get power, i got 2.5mA and 43.23mm extension, hopefully thats right :S
Nah man it's just mgh/t as there was no friction
 

SnowTau

Member
Joined
Oct 11, 2011
Messages
73
Gender
Male
HSC
2011
For the escalator, Power = W/t
W= change in PE + KE
So in this case W = PE
Hence Power = mgh/25 (25 seconds was the time.)

Weight was 115, height was 9, use 10 for g.

P = 115x9x10/25
=414

As for the Amps one I'm really not sure...

I think R was 800 ohms, 2 was what I used for V so,
2=Ix800
I = 2/800
=2.5x10-3 or 0.0025
x10-3 is milli, so 2.5mA I think...

damn, 9/10 for me too did anyone get .1388888 for VR of the bike?
No, but I got something close to that for the power loss of the battery or something? Might not been a battery.. i dont remember lol.. power loss of something.... whatever it was used for xD mighta been a bike, don't remember.


Do u remember what the values were for the extension question?
8M length... 111 for the modulus ... 0.5mm^2 and 300N I THINK.
 
Last edited:

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top