2012 HSC Extension 2 Mathematics Solutions (1 Viewer)

alicekate18

New Member
Joined
Nov 14, 2011
Messages
8
Gender
Female
HSC
2013
This makes me feel heaps better about the exam. I screwed up that volumes question (which I thought I had anyway) but I'm confident I got most of that multiple choice (I can't remember all of my answers, but I know I got 10 right).
 

lgnorance

Member
Joined
Oct 2, 2012
Messages
98
Gender
Female
HSC
2003
I don't think that is correct because u1 and u2 are complex numbers (i.e. x and y still contain an imaginary part within u1, u2 and z)

I personally think that locus question is pretty dodgy or there is some sort of typo because it is obvious by inspection that since B1 and B2 are fixed then clearly their midpoint is fixed.
agreed theres a typo al; as p varies the locus doesn't change. in the exam my mind was like 'wtf is this questoin'. checked my working 5 times to ensure that i was right cause its such a double reverse trick :/

i wrote the locus is a "vector" and i had the eqn the same as the correct answer, probs gonna lose one mark cause its actually a point. gayyyyyyyyyyyy
 

Nooblet94

Premium Member
Joined
Feb 5, 2011
Messages
1,044
Gender
Male
HSC
2012
Can't think of any over the top of my head.


That's the way I did it back the first time I tried proving that. Your way's far more efficient though.

EDIT: dafuq is up wif mah tex
 
Last edited:

Trebla

Administrator
Administrator
Joined
Feb 16, 2005
Messages
8,394
Gender
Male
HSC
2006
Your TeX code should all be in one line i.e. no physically pressing 'enter' to make a new line
 

someth1ng

Retired Nov '14
Joined
Sep 18, 2010
Messages
5,558
Location
Adelaide, Australia
Gender
Male
HSC
2012
Uni Grad
2021
For inequalities, are you allowed to do it this way

If <line proving is true>
=> Expand/square etc
=> Factorise
=> Forms a perfect square
.'. Must be >0

That's what I did.
 

Carrotsticks

Retired
Joined
Jun 29, 2009
Messages
9,494
Gender
Undisclosed
HSC
N/A
That is usually incorrect because that is going by the converse.

However in this case, that is correct because all steps used are 'iff' steps (both directions work) so by going one way, you have also shown the other direction.
 

someth1ng

Retired Nov '14
Joined
Sep 18, 2010
Messages
5,558
Location
Adelaide, Australia
Gender
Male
HSC
2012
Uni Grad
2021
That is usually incorrect because that is going by the converse.

However in this case, that is correct because all steps used are 'iff' steps (both directions work) so by going one way, you have also shown the other direction.
Okay, that's all cool because when I went to Dux College, they said that was okay as long as you say 'if' and use the 'implies' sign (=>). Just wanted to double check.

Thanks mate.
 

RealiseNothing

what is that?It is Cowpea
Joined
Jul 10, 2011
Messages
4,591
Location
Sydney
Gender
Male
HSC
2013
I don't think that is correct because u1 and u2 are complex numbers (i.e. x and y still contain an imaginary part within u1, u2 and z)

I personally think that locus question is pretty dodgy or there is some sort of typo because it is obvious by inspection that since B1 and B2 are fixed then clearly their midpoint is fixed.
B1 and B2 aren't fixed though? They depend on the position of P as the point B1 is placed such that APB is an isosceles right angled triangle. Hence if P moves, so does B to compensate for this restriction.
 

zeebobDD

Member
Joined
Oct 23, 2011
Messages
414
Gender
Male
HSC
2012
hey for that locus of B1B2, i got the same expression as you, did you have to write down the locus though? like namewise i wrote straight line lol
 

kingkong123

Member
Joined
Dec 20, 2011
Messages
98
Gender
Male
HSC
2012
I did my working out and said



But i didn't specifically say that it is a fixed point. Would i lose any marks?
 

ismeta

Member
Joined
Feb 19, 2012
Messages
258
Gender
Female
HSC
2012
Oh excellent, it was a fixed point. I was worried I'd messed something up when I found it was a point...
 

Zeroes

Member
Joined
Jan 13, 2010
Messages
263
Location
Sydney
Gender
Female
HSC
2012
ignore post

was gonna ask something but realised I misread the question lol
 
Last edited:

NickGero

Member
Joined
Sep 8, 2012
Messages
33
Gender
Male
HSC
2012
I did my working out and said



But i didn't specifically say that it is a fixed point. Would i lose any marks?
^This. Except for some reason I said it was the perp bisector of u1 and u2. I really hope they were just looking for the algebra and didn't need the geometric description.
 

Carrotsticks

Retired
Joined
Jun 29, 2009
Messages
9,494
Gender
Undisclosed
HSC
N/A
Okay, that's all cool because when I went to Dux College, they said that was okay as long as you say 'if' and use the 'implies' sign (=>). Just wanted to double check.

Thanks mate.
Actually, it is NOT okay to just say the 'if' sign. Your working out ONLY works if you use the IFF sign, because you are proving the converse with 'iff' statements and thereby proving the forward statement.

Think of it as building a one-way vs two-way street. By arguing the 'if', you have proved one direction and thus constructed a one-way road.

However, your one-way road is going the wrong way.

On the other hand, if you had built a two-way road, it doesn't matter whether you started from one end or the other, because it goes both ways anyway!
 

someth1ng

Retired Nov '14
Joined
Sep 18, 2010
Messages
5,558
Location
Adelaide, Australia
Gender
Male
HSC
2012
Uni Grad
2021
Actually, it is NOT okay to just say the 'if' sign. Your working out ONLY works if you use the IFF sign, because you are proving the converse with 'iff' statements and thereby proving the forward statement.

Think of it as building a one-way vs two-way street. By arguing the 'if', you have proved one direction and thus constructed a one-way road.

However, your one-way road is going the wrong way.

On the other hand, if you had built a two-way road, it doesn't matter whether you started from one end or the other, because it goes both ways anyway!
Yeah, that makes sense. So I just use the => thing and it should be fine?
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top