Esterfication help! (1 Viewer)

SanjoyM

Member
Joined
Apr 7, 2011
Messages
691
Gender
Male
HSC
2012
Okay, this is a simple question, but I think I'm stuck:
Explain why citric acid is not a suitable catalyst for esterfication?

Assess the risks involved in an investigation to produce esters and describes the procedures to minimise these risk (3 marks)

I was thinking about wearing goggles, maintaining a distance, treating the equipments with care? Any others?

Can someone help me please?

Thank you:)
Just started learning about esters, so a bit confused lol
 

Dylanamali

Active Member
Joined
Jul 7, 2009
Messages
1,248
Gender
Male
HSC
2011
boiling chips - spread heat out evenly -> reactants are volatile so you don't want immense heat on one location.

refluxing equipment - allows the volatile reactants to be heated, yet due to the refluxing equipment there is no risk of an explosion through a pressure buildup (if it were a closed system).
 

SanjoyM

Member
Joined
Apr 7, 2011
Messages
691
Gender
Male
HSC
2012
So, there are minimal risks involved, but the experiment does pose possible harmful risks? I always stumble on these questions about safety! LOL
Thank you:)
What about the first one?
'Explain why citric acid is not a suitable catalyst for esterfication?"
 

Dylanamali

Active Member
Joined
Jul 7, 2009
Messages
1,248
Gender
Male
HSC
2011
not sure.. never come across that question before.

Perhaps it's strength (as a weak acid) makes it unsuitable as a catalyst?

I think the best answer would have to be that concentrated sulfuric acid, not only acts as a catalyst in the reaction, but it also has the ability to shift the equilibrium to favour the side of the products and thus favour the production of ester (increase the yield). It does this through it's property as a dehydrating agent - decreasing the concentration of the water and thus causing the eq. position to favour the products. Perhaps, because citric acid does not have this property as a dehydrating agent it is unsuitable as a catalyst. But then again, catalysts generally have no effect on equilibrium position. So i'm not sure.
 

iampeterr

King
Joined
Jul 24, 2011
Messages
198
Location
west
Gender
Male
HSC
2012
Uni Grad
2016
citric acid is not suitable because it doesn't dehydrate the solution.
concentrated h2so4 removes water from the products, therefore shifting the equilibrium to the right to increase the yield (ester).
 

Enzym3

New Member
Joined
Jan 22, 2010
Messages
13
Gender
Undisclosed
HSC
N/A
Uni Grad
2005
Esterificiation is a dehydration reaction and therefore requires a strong acid as a catalyst, citirc acid is triprotic but it isn't strong (i.e. doesn't fully ionize) and therefore won't cause dehydration


Risk Process to manage risk

Alkanol is flammable heat in a water bath (or with boiling chips, or both) avoid naked flame

Glass wear is breakable Never run with glassware, report any breakages to lab supervisor immediately
and can be sharp

sulfuric acid (catalyst) If spilled onto skin rinse with water immediately and inform first aide officer
is corrosive and harmful
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top