MedVision ad

HSC 2007 Q26 DC Transformer possible?? (1 Viewer)

Mr_Kap

Well-Known Member
Joined
Mar 24, 2015
Messages
1,127
Gender
Male
HSC
2015
In the HSC 2007 Q26(a).

"Explain why AC is preferable to DC as an input current for transformers"

Does this mean that there are DC transformers if they are asking this? What even?

And can someone help me answer this question as well. Thanks.
 

sy37

Active Member
Joined
Jun 22, 2014
Messages
323
Gender
Male
HSC
2015
It is asking why AC > DC for transformers. It is because a transformer needs a changing magnetic flux so a current can be induced in the secondary coil. So AC is needed for this since.
 

Fizzy_Cyst

Owner @ Sigma Science + Phys Goat
Joined
Jan 14, 2011
Messages
1,212
Location
Parramatta, NSW
Gender
Male
HSC
2001
Uni Grad
2005
It is asking why AC > DC for transformers. It is because a transformer needs a changing magnetic flux so a current can be induced in the secondary coil. So AC is needed for this since.
Just be careful when saying DC cannot be used, as it is true that a TRUE or STEADY DC source cannot be used (constant positive voltage/current), whereas VARYING DC, which is somewhat similar to an absolute value sine graph (non-constant positive voltage/current) could be used as the voltage/current/flux is changing.


fullwave.gif
 
Last edited:

mrpotatoed

Active Member
Joined
Nov 16, 2014
Messages
195
Gender
Male
HSC
2015
DC can also be used if you have a switch that is repeatedly opened and closed, as that would cause a changing flux. But obviously it is much easier / reliable and im assuming efficient to use AC.
 

Fizzy_Cyst

Owner @ Sigma Science + Phys Goat
Joined
Jan 14, 2011
Messages
1,212
Location
Parramatta, NSW
Gender
Male
HSC
2001
Uni Grad
2005
DC can also be used if you have a switch that is repeatedly opened and closed, as that would cause a changing flux. But obviously it is much easier / reliable and im assuming efficient to use AC.
Yep! Such 'switches' are termed 'interrupters' and are how induction coils function!
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top