Section I: Multiple Choice (1 Viewer)

independantz

Member
Joined
Apr 4, 2007
Messages
409
Gender
Male
HSC
2008
Kearnzo said:
Thats moles.

Ph = -log10[H+]

c = n/v

volume is 20mls +30 mls = 0.05 L

therefore [H+] is 0.0001/0.05 = 0.002

Ph = -log10[0.002] is equal to 2.69... = 2.7
This is correct.
 

Darrow

Executant of Life
Joined
Mar 16, 2007
Messages
112
Gender
Male
HSC
2008
For 12 I got B
Explain why it is A
 

Kearnzo

Member
Joined
Sep 4, 2007
Messages
48
Gender
Male
HSC
2008
Darrow said:
For 12 I got B
Explain why it is A
The sample at Site 1 is just after the sewage plant discharge, this would increase the BOD and E. Coli, for obvious reasons.

This would disperse by the Estuary sample.

EDIT:

The TDS at site 3 is very high, this would be because of the salty water of the sea, compared to the fresh water of the river.

Site 4 (mine) increases TDS by 205, and the sewage by a bit aswell.

And thats really all you need to look at.
 
Last edited:

Propadanda

Member
Joined
Apr 23, 2008
Messages
56
Gender
Undisclosed
HSC
N/A
I'ts definitely 2.7, I just did the calc.

EDIT: Just realised I fucked the calc haha.
 
Last edited:

Darrow

Executant of Life
Joined
Mar 16, 2007
Messages
112
Gender
Male
HSC
2008
Doesnt that make it B?
BOD would be high in an estuary
So would TDS
Gah I need the question

All water flows to the estuary remember..
 

Propadanda

Member
Joined
Apr 23, 2008
Messages
56
Gender
Undisclosed
HSC
N/A
n[H+] = .02 x .08
= 1.6 x 10^-3
n[OH-] = .05 x .03
= 1.5 x 10^-3

Therefore, H+ is in excess, and 1 x 10^-4 is left over after mix.

New volume = .05 L

Therefore [H+] = 1 x 10^-4 / .05

= 2.69

Well I'm an idiot.

I skipped a step there somewhere but that's the gist of it.
 

Propadanda

Member
Joined
Apr 23, 2008
Messages
56
Gender
Undisclosed
HSC
N/A
Kearnzo said:
The sample at Site 1 is just after the sewage plant discharge, this would increase the BOD and E. Coli, for obvious reasons.

This would disperse by the Estuary sample.

The TDS at site 3 is very high, this would occurs because of copper mine discharge. TDS would be greatly increased due to the ions in the water from mining.

And thats really all you need to look at.
But there isn't even the option of Site 3 being the mine?

I put A..
 

friction

Member
Joined
May 8, 2006
Messages
494
Gender
Male
HSC
2008
independantz said:
1-A
2-B
3-A
4-C
5-C
6-D
7-D
8-D
9-D
10-B
11-A
12-D- but ppl are saying the answer is A not entirely sure
13-C
14-C- answer is B forgot to divide by the volume to find concentration then log it >.>
15-B

That's what i got, so far 2 wrong ...>.>
I got exactly the same except either A or B for question 12. I think A.
 

shakky15

Member
Joined
Nov 12, 2006
Messages
355
Gender
Male
HSC
2008
Propadanda said:
And can someone please explain to me how the fuck you can add a strong acid to a strong base, in relatively similar proportions (not identical, but similar), and end up with a very acidic final pH? I thought Q14 had to be at least C or D. I thought because the weren't in proportion it would be C but then I thought that was still too acidic to have a pH of 4...so I put D, even though it obviously wasn't a perfect neutralisation but ehhh.
that was my reasoning. spent ages with plenty of calculations to no avail. had to move on so picked C. however, if u remember the titration topic, the whole equivalence point thing, u notice how once equivalence is reached, it very quickly reaches the extreme, hence 2.7 is believable.
 

shakky15

Member
Joined
Nov 12, 2006
Messages
355
Gender
Male
HSC
2008
Propadanda said:
n[H+] = .02 x .08
= 1.6 x 10^-3
n[OH-] = .05 x .03
= 1.5 x 10^-3

Therefore, H+ is in excess, and 1 x 10^-4 is left over after mix.

New volume = .05 L

Therefore [H+] = 1 x 10^-4 / .05

= 2.69

Well I'm an idiot.

I skipped a step there somewhere but that's the gist of it.
my god i was SO CLOSE! i got the 0.1 x 10^-3 difference, but stalled there!! ahh dammit!! coulda got 15/15 :(
 

tommykins

i am number -e^i*pi
Joined
Feb 18, 2007
Messages
5,730
Gender
Male
HSC
2008
berna007 said:
product side = left side actually..
just look at the question okay!!!!
lol r u fo' srs?

a chemical reaction is when new chemicals are made, it doesn't have to be the bonding of two reactants to produce a product.
 

hayyleyy

New Member
Joined
Feb 13, 2008
Messages
25
Gender
Female
HSC
2008
did anyone else find multiple choice REALLY hard?!?!?
it was a bad start to the paper except it got better after that i think :)
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top