Polymer Question - PVC (1 Viewer)

bayan92

Member
Joined
Feb 24, 2008
Messages
232
Gender
Male
HSC
2009
Did you answer it by saying:

1. Crude oil cracked to get ethene
2. Ethene undergoes substitution with chlorine gas
3. Chloroethene undergoes addition polymerization to form PVC
4. PVC heated and molded to pipe shape
 

mR sinister

Member
Joined
Nov 24, 2008
Messages
127
Gender
Male
HSC
2009
i chose polyethylene Bottle.
yea i talked about crude oil into ethene
Ethene to Ethane.
Ethene addition polymerisation with:
-iniation
-propagation
-termination

Then how HDPE is formed, and HDPE properties
Then finally HDPE used to make bottle :D

darn, should of chose PVC since its thermoplastic, would of been easier... ohh well
 

Imagination

New Member
Joined
Sep 6, 2008
Messages
15
Gender
Male
HSC
2009
didint for the polyethylene bottle, have to talk about LDPE and not HDPE??
 

sharp_pencil

Member
Joined
Mar 8, 2009
Messages
51
Gender
Male
HSC
2009
i chose polyethylene Bottle.
yea i talked about crude oil into ethene
Ethene to Ethane.
Ethene addition polymerisation with:
-iniation
-propagation
-termination

Then how HDPE is formed, and HDPE properties
Then finally HDPE used to make bottle :D

darn, should of chose PVC since its thermoplastic, would of been easier... ohh well
Dude plastic bottles are LDPE..... :| but i guess they'll accept HDPE mayybeee
 

clintmyster

Prophet 9 FTW
Joined
Nov 12, 2007
Messages
1,067
Gender
Male
HSC
2009
Uni Grad
2015
Dude plastic bottles are LDPE..... :| but i guess they'll accept HDPE mayybeee
I doubt it because HDPE is nowhere near as flexible. The question said "raw" right? Gahh I started from ethene =[ there goes a couple of marks.
 

TechnIx

Member
Joined
Apr 4, 2009
Messages
88
Gender
Male
HSC
N/A
I used Cellulose as raw material........................oh man
Me too! It's ok, it said Natural Resource (which includes either Cellulose or Crude Oil)

I freaked out for a second there too.

didint for the polyethylene bottle, have to talk about LDPE and not HDPE??
Yeah I did LDPE, which I believe is correct. It's low density, branched, structure makes it soft, yet tough and flexible. Perfect for a plastic bottle. Then other additives etc for colouring, shaping, whatever...

LDPE formed with oxygen free radical, high pressure and 80-300 degrees.
 

sordatsoy

New Member
Joined
Oct 14, 2009
Messages
22
Gender
Female
HSC
2009
I didnt mention LDPE OR HDPE.. after i talked about cracking crude oil, i just talked about initiation, propagation and termination....then i talked about how it is made into a bottle....would i lose marks for not mentioning which type (LDPE/HDPE) it is?
 

Monsterman

Member
Joined
Aug 5, 2007
Messages
345
Location
Syd
Gender
Undisclosed
HSC
2009
^
you may a mark? i think
i didnt mention raw materials
started from ethene.. =\
 

nosh22

Member
Joined
Mar 23, 2009
Messages
84
Gender
Female
HSC
2009
Yeah I did the polyethylene bottle. Assumed it was HDPE.
 

5233andy

Member
Joined
Nov 10, 2007
Messages
417
Gender
Male
HSC
2009
I went on about the fermentation of glucose, the production of ethanol, the dehydration of ethanol, the polymerisation of ethene... I didn't talk about HDPE/LDPE... oh gosh...
 

arjungamer123

Member
Joined
Nov 21, 2008
Messages
179
Gender
Male
HSC
2009
Me too! It's ok, it said Natural Resource (which includes either Cellulose or Crude Oil)

I freaked out for a second there too.



Yeah I did LDPE, which I believe is correct. It's low density, branched, structure makes it soft, yet tough and flexible. Perfect for a plastic bottle. Then other additives etc for colouring, shaping, whatever...

LDPE formed with oxygen free radical, high pressure and 80-300 degrees.
Guys (and girls), I don't think some of you are thinking. LDE makes plastic bags for shopping. Imagine carrying water in that!

HDPE is the safe option here. They can't fault you for saying HDPE, because HDPE is used in milk bottles- aka a type of bottle.

EDIT: OP, question said NATURAL RAW PRODUCT- not sure if they'll accept crude oil. I think they wanted you to go through the cellulose process of doing ish.
 
Last edited:

TechnIx

Member
Joined
Apr 4, 2009
Messages
88
Gender
Male
HSC
N/A
I went on about the fermentation of glucose, the production of ethanol, the dehydration of ethanol, the polymerisation of ethene... I didn't talk about HDPE/LDPE... oh gosh...
Dont stress, you've covered most of it. 1 mark at most you've lost.

Hell, those who did mention it seemed to not know which one it is anyway.....

Guys (and girls), I don't think some of you are thinking. LDE makes plastic bags for shopping. Imagine carrying water in that!

HDPE is the safe option here. They can't fault you for saying HDPE, because HDPE is used in milk bottles- aka a type of bottle.

EDIT: OP, question said NATURAL RAW PRODUCT- not sure if they'll accept crude oil. I think they wanted you to go through the cellulose process of doing ish.
Good reasoning, however I'm reading here in my Excel book for LDPE ;
"It is readily melted and moulded and is used to produce such items as flexible film wrap, sandwich bags, plastic bags, and PLASTIC SQUEEZE BOTTLES"

As for HDPE, it says petrol containers, rubbish bins plastic crates.
HDPE just seems too tough to be honest.

I think either will be OK, as I do know that milk bottles are made from HDPE (or is that just their tough lid where it says HDPE? I cant remember). It may just be the milk bottle lid that is HDPE lol.
 

untouchablecuz

Active Member
Joined
Mar 25, 2008
Messages
1,693
Gender
Male
HSC
2009
what i put:

biomass raw material
cellulose derived from biomass (wrote formula)
cellulose (broken down by various enzymes) --> maltose --> glucose
glucose fermented and ethanol obtained (wrote equation)
ethanol dehydrated to ethene+water in the presence of conc. H2SO4
ethene LDPE process (+ equation)
"since LDPE is thermoplastic, it can be melted down and moulded to create bottles"
 

kandyman

New Member
Joined
Apr 23, 2009
Messages
26
Gender
Male
HSC
2008
Catalytic cracking of larger petrochemicals (ex decane) forming ethene. Substitution reaction to produce the chloroethene, then the chloroethene is subjected to pressures up to 300 mPa, and an initiator molecule is added (dodecyl peroxide). The initiator molecule breaks down to form free radicals, which join onto the chloroethene to produce activated free monomers, which then propagate to form the chain. The initiator molecule is then reintroduced to terminate the chain. Once the polycholoroethene is produced, it is shaped and moulded to form the PVC pipe.
 

Fortify

♪웨딩드레스
Joined
Mar 20, 2007
Messages
1,281
Gender
Male
HSC
2009
I used Cellulose as raw material........................oh man
dw, i did that as well :)

I doubt it because HDPE is nowhere near as flexible. The question said "raw" right? Gahh I started from ethene =[ there goes a couple of marks.
uh oh i used HDPE cos i always thought LDPE was plastic bags, cling wrap :/
 

imoO

Member
Joined
Apr 6, 2008
Messages
302
Gender
Male
HSC
2009
Shit...

I said that
physically - the momomers link together forming a long chain blah blah

chemically -
initiation
propagation
termination....

i didn't talk about how its produced from ethanol or shit like that...

what d'you rekon ?
 

Fortify

♪웨딩드레스
Joined
Mar 20, 2007
Messages
1,281
Gender
Male
HSC
2009
Shit...

I said that
physically - the momomers link together forming a long chain blah blah

chemically -
initiation
propagation
termination....

i didn't talk about how its produced from ethanol or shit like that...

what d'you rekon ?
LOL . from 'raw materials' :/
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top